For our BMW carbon fiber parts:

Dry carbon fiber product is formed by using a pre-preg or impregnated piece of carbon materials. The carbon fiber is impregnated with epoxy resin before any other process.

This piece of carbon is first placed into a mold, and then sealed in to a vacuum to properly cure. The mold is strong and made by special material, or place into a two side mold made by aluminum alloy. The mold and the product will be heated under 100 psi with very high temperature (depends on the formula) . The process will press out all the air and let different layers bite together.

Dry carbon is the highest quality version of carbon fiber products that are produced. However, it is 3 to 4 times more expensive to produce in over all cost than its counterpart.

Dry Carbon Fiber are:

Lighter and Significantly stronger

Superior manufacturing process

Uses a dry finish for enhancing its cosmetic appearance

Disadvantages of Dry Carbon Fiber:

Almost four times as expensive to produce

Will fade if not adequately maintained or clear coated

BMW has now released many different chassis code:

E, F, G

Parts may be interchangeable in the same generation, such as Mirror cover for G20 also works on G22 G30 etc.

If you have any question about if our product will fit your car, we normally have them in description, if you still have question, feel free to ask on our social media. Much quicker reply than email.

All carbon fiber parts from EzCarbon are direct supplied by ourselves.

Spoilers :

All 2 series include M2 can share.

All 3 series in the same generation include M3 can share.

F generation 4 series use unique shape of trunk, therefore M4, F32, F36 can NOT share the spoiler.

BMW Dry Carbon Mirror cover

All models below use can share the mirror cover:

G20 / G22 / G30 / G14 / 15/ 16/ G01 / 02